Operation Procedures for Tubular Stranding Machine
2021-03-30
How much do you know about the process operation procedures of tubular stranding machine? Next, I will introduce the process operation procedures of tubular stranding machine. Taking JG2-500/6 tubular winch as an example, the following briefly describes the process operation procedures.
The tubular stranding machine is mainly used for stranding copper stranded wire, aluminum stranded wire, steel-cored aluminum stranded wire and steel wire. The production section of the stranding machine is 16-50mm for copper strand, 16-95mm for aluminum strand and 16-70mm for steel-cored aluminum strand.
Maximum stranded outer diameter: 15mm
Tube speed: 350r/min at gear I, 500r/min at gear II.
Diameter of traction wheel: 1250mm (double traction
Outlet speed: 7.63 ～ 165.97r/min
Strand pitch: 21.81 ～ 331.95min
If the stranding machine is equipped with insulated cables, the wrapping shall be solid, and used for pressing without soft feeling and wrinkles. Semi-conductive paper shall not be disconnected. Wrapping and covering is 1/3, and paper tape overlap is not allowed.
The cabling direction is right, and the cabling cores are arranged according to the number one, two and three. Well, that's the end of the process operation procedures for tubular stranding machine.
The tubular stranding machine is mainly used for stranding copper stranded wire, aluminum stranded wire, steel-cored aluminum stranded wire and steel wire. The production section of the stranding machine is 16-50mm for copper strand, 16-95mm for aluminum strand and 16-70mm for steel-cored aluminum strand.
Main Equipment Parameters of the Tubular Strander
Production range: single-wire diameter, copper 1.50~3.5, aluminum 1.7~4.6 mm, steel wire 1.8~3.2.Maximum stranded outer diameter: 15mm
Tube speed: 350r/min at gear I, 500r/min at gear II.
Diameter of traction wheel: 1250mm (double traction
Outlet speed: 7.63 ～ 165.97r/min
Strand pitch: 21.81 ～ 331.95min
If the stranding machine is equipped with insulated cables, the wrapping shall be solid, and used for pressing without soft feeling and wrinkles. Semi-conductive paper shall not be disconnected. Wrapping and covering is 1/3, and paper tape overlap is not allowed.
The cabling direction is right, and the cabling cores are arranged according to the number one, two and three. Well, that's the end of the process operation procedures for tubular stranding machine.
